Twelve months of feedback from distributors in nine countries condensed into a single range refresh — more depths, more colours, less compromise.
We launched our first vanity range in 2019 with three cabinet depths and two finish options. It sold well. It also generated a consistent set of complaints from our distribution partners: not enough depth options for the narrow bathroom layouts common in European apartments, no integrated basin option for hospitality specifications, and the hardware was only available in chrome. We heard them every quarter. This range refresh addresses all three.
Six Cabinet Depths
The new programme runs from 320 mm to 560 mm in 40 mm increments. The 320 mm depth was specifically requested by our partners in France, Italy, and Portugal, where the pre-war apartment bathroom is often under 900 mm from wall to door. The 560 mm depth is for clients who want a deep countertop and have the room for it.
All six depths share the same door and drawer mechanism, the same hinge system, and the same finish options. If you are a distributor carrying the range, you do not need to stock separate hardware kits per depth — one kit fits all.
Integrated Basin Options
We have added an integrated ceramic basin option across the 400 mm, 480 mm, and 560 mm depths. The basin is kiln-fired as a single unit with the countertop — no silicone joint, no grout line, no maintenance gap. The overflow and waste are integrated into the basin mould. For a hospitality specification, this means one fewer maintenance point per room. For a high-specification residential project, it means a cleaner line.
Available Basin Formats
- Integrated full-width basin (one tap hole, centred)
- Integrated offset basin (one tap hole, off-centre, 60/40 split)
- Countertop cut-out for vessel basin (no basin supplied)
- Standard flat countertop (basin specified separately)
Matte Black Hardware
The push-to-open drawer system, the door hinges, the waste, and the optional towel rail bracket are now available in matte black PVD across the full range. The same PVD process we use on our faucet and shower hardware — 240-hour salt-spray tested, warranted for five years against tarnish and flaking.
We are aware that matte black has been "the trend" for several years and that some distributors are beginning to see it cycle out in certain markets. We are not launching matte black because it is fashionable; we are launching it because partners in the Gulf, Australia, and the United States have been requesting it since 2023 and we took longer than we should have to get it to market.
Availability
The expanded programme is available to order from 1 May 2026. Lead time from the factory is six to eight weeks. Sample doors and hardware in all finishes can be requested via your account manager or through our export desk.
